APPL-158 Classroom Technology Use

How to get Started:

• Log in to the PC
• Turn on the projector by clicking the blue button in the top left of the remote
• Turn on the SMARTBoard by clicking the power button on the left side of the panel on the SMARTBoard

To use the Document Camera:

• Power on the document camera
• Once powered on, click the icon on the document camera that looks like a camera
• Select the “VGA” option on the StarTech switch that is above the PC
• Your video will then be displayed on the projector

To use the SMARTBoard:

• The SMARTBoard can only be written on when the PC is set to Duplicate

When Completed:

• Sign out of the PC
• Turn off the projector by clicking the blue button on the remote
• Turn off the SMARTBoard by clicking the same button used to power it on
• Turn off the document camera by holding down the power button and set the input on the StarTech switch to “HDMI 1”, if applicable

Troubleshooting:

Projector Issues:

• Assure that the display source is set to HDMI 1
• This can be done by cycling through inputs using the “Source Search” button on the top right of the remote

Input Issues – StarTech Switch:

• To have the PC project to the projector, make sure that “HDMI 1” is selected
• To have the document camera project to the projector, make sure that “VGA” is selected

PC Issues:

• Assure that the “Project” settings on the PC are set to “Duplicate”
• This can be done by using the media center in the bottom right of the screen
• The following provides an example of Windows 11
• Click on the media center icons

• This will open the media center, in which you can set the “Project” settings
• Click on the “Project” button

• After selecting the “Project” settings, you can select “Duplicate”